Broadcom Networking BCM957508-N2100G N2100G Ethernet PCIE OCP 3.0 SFF Network Adapter Brown Box
(No reviews yet)
Write a Review
- Brand:
- Broadcom
- Part Number #
- AS257852
- UPC:
- 650861000512
$823.40
Description
General Description
The Broadcom BCM957508-N2100G is a dual-port 100 Gb/s PCI Express 4.0 x16 Network Adapter designed to the Open Compute Project (OCP) 3.0 Design Specification in small form factor with two QSFP56 network connectors. The adapter supports QSFP56/QSFP28/QSFP+ optical modules and copper direct-attach cables. The network adapter uses the Broadcom BCM57508 200GbE MAC controller with an integrated dual-channel 100GbE SFI transceiver.
Features
Dual-port pluggable media interface, which is compatible with a QSFP56/QSFP28/QSFP+ optical transceiver or a copper direct-attach cable.
Industrys most secure PCIe adapter solution leveraging Broadcoms BroadSAFE technology
Supports 50G PAM-4 and 25G NRZ signaling.
Multi-Host up to four hosts.
Fully compliant with the SFF-8402 standard.
x16 PCI Express 4.0 compliant.
SR-IOV with up to 1k virtual functions (VFs).
Function-Level Reset (FLR) support.
TruFlow flow processing engine.
Virtual Network Termination VXLAN, NVGRE, Geneve, GRE encap/decap.
vSwitch Acceleration.
Tunnel-aware stateless offloads.
DCB support PFC, ETS, QCN, DCBx.
RDMA over Converged Ethernet (RoCE)
Network Controller Sideband Interface (NC-SI).
SMBus 2.0.
MCTP over SMBus.
Jumbo frames up to 9 KB.
Advanced congestion avoidance.
Multiqueue, NetQueue, and VMQ.
IPv4 and IPv6 offloads.
TCP, UDP, and IP checksum offloads.
Large send offload (LSO).
Large receive offload (LRO).
TCP segmentation offload (TSO).
Receive-side scaling (RSS).
Transmit-side scaling (TSS).
VLAN insertion/removal.
Interrupt coalescing.
Network boot—PXE, UEFI.
iSCSI boot.
Wake-on-LAN (WOL).
MSI and MSI-X.
OCP 3.0 FRU support.
Conforms to the OCP 3.0 Design Specification Version 1.0. Item Dimension (L"xW"xH")
13 x 9 x 7
Weight
6 lbs
Warranty Information
3 Years
View AllClose
The Broadcom BCM957508-N2100G is a dual-port 100 Gb/s PCI Express 4.0 x16 Network Adapter designed to the Open Compute Project (OCP) 3.0 Design Specification in small form factor with two QSFP56 network connectors. The adapter supports QSFP56/QSFP28/QSFP+ optical modules and copper direct-attach cables. The network adapter uses the Broadcom BCM57508 200GbE MAC controller with an integrated dual-channel 100GbE SFI transceiver.
Features
Dual-port pluggable media interface, which is compatible with a QSFP56/QSFP28/QSFP+ optical transceiver or a copper direct-attach cable.
Industrys most secure PCIe adapter solution leveraging Broadcoms BroadSAFE technology
Supports 50G PAM-4 and 25G NRZ signaling.
Multi-Host up to four hosts.
Fully compliant with the SFF-8402 standard.
x16 PCI Express 4.0 compliant.
SR-IOV with up to 1k virtual functions (VFs).
Function-Level Reset (FLR) support.
TruFlow flow processing engine.
Virtual Network Termination VXLAN, NVGRE, Geneve, GRE encap/decap.
vSwitch Acceleration.
Tunnel-aware stateless offloads.
DCB support PFC, ETS, QCN, DCBx.
RDMA over Converged Ethernet (RoCE)
Network Controller Sideband Interface (NC-SI).
SMBus 2.0.
MCTP over SMBus.
Jumbo frames up to 9 KB.
Advanced congestion avoidance.
Multiqueue, NetQueue, and VMQ.
IPv4 and IPv6 offloads.
TCP, UDP, and IP checksum offloads.
Large send offload (LSO).
Large receive offload (LRO).
TCP segmentation offload (TSO).
Receive-side scaling (RSS).
Transmit-side scaling (TSS).
VLAN insertion/removal.
Interrupt coalescing.
Network boot—PXE, UEFI.
iSCSI boot.
Wake-on-LAN (WOL).
MSI and MSI-X.
OCP 3.0 FRU support.
Conforms to the OCP 3.0 Design Specification Version 1.0. Item Dimension (L"xW"xH")
13 x 9 x 7
Weight
6 lbs
Warranty Information
3 Years
Read Before Orderings
- Product images are for illustrative purposes only and the final product delivered may vary from the one shown above.
- In some cases, a product sold may arrive in different packaging than its original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item.
- At checkout, the shipping cost is a general estimate which is subject to change depending on size/weight/quantity of ordered goods.
- Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality.
- Refurbished printers may not have full ink cartridges or laser toners.
- Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees.
- Please note if you are concerned about any of the above conditions or have any question at all, we highly recommend that you contact us on sales@ithardwarehub.com or call 425-615-6227 before placing an order.
Related Products
