Broadcom Network BCM957414M4143C 50 Gb/s SFP28 PCIE 3.0 x8 OCP 2.0 Mezzanine Card Brown Box
(No reviews yet)
Write a Review
- Brand:
- Broadcom
- Part Number #
- AS259272
- UPC:
- 650861000161
$372.77
Description
General Description
The Broadcom® BCM957414M4143C is a single-port 50 Gb/s, PCI Express 3.0 x8 Mezzanine Card, designed to the Open Compute Project (OCP) Mezzanine Card 2.0
Design Specification with a QSFP28 network connector as a Type 1 adapter with the board outline adhering to the original v0.5 dimensions. The adapter supports both QSFP28 optical modules and copper direct-attach cables.
The card uses the Broadcom BCM57414 50GbE MAC controller with an integrated single-channel 50GbE SFI transceiver.
Features
• Single-port pluggable media interface, which may be equipped with 50 Gb/s QSFP28 optical transceiver or with copper direct-attach cable
• Fully compliant with the SFF-8665 standard
• x8 PCI Express 3.0 compliant
• SR-IOV with up to 128 virtual functions (VFs)
• Function-Level Reset (FLR) support
• TruFlow™ flow processing engine
• Virtual Network Termination—VXLAN, NVGRE,Geneve, GRE encap/decap
• vSwitch acceleration
• Tunnel-aware stateless offloads
• DCB support: PFC, ETS, QCN, DCBx
• RDMA over Converged Ethernet (RoCE)
• Network Controller Sideband Interface (NC-SI)
• SMBus 2.0
• MCTP over SMBus
• PCIe-based UART and KCS
• Jumbo frames up to 9 KB
• Advanced Congestion Avoidance
• Multiqueue, NetQueue, and VMQ
• IPv4 and IPv6 offloads
• TCP, UDP, and IP checksum offloads
• Large Send Offload (LSO)
• Large Receive Offload (LRO)
• TCP Segmentation Offload (TSO)
• Receive-side Scaling (RSS)
• Transmit-side Scaling (TSS)
• VLAN insertion/removal
• Interrupt coalescing
• Network boot—PXE, UEFI
• iSCSI boot
• Wake-on-LAN (WOL)
• MSI and MSI.X
• Conforms to the OCP Mezzanine Card 2.0 Design Specification Type 1 vertical stack Description
Single-port 50 Gb/s QSFP28 Ethernet x8 PCI Express OCP 2.0 Mezzanine Card, RoHS-compliant
Storage temperature
-40oC to +70oC
Storage humidity
5% to 95% non-condensing
Item Dimension (L inchxW inchxH inch)
13 x 8 x 7
Weight
6.00 lb
Warranty Information
3 Years
View AllClose
The Broadcom® BCM957414M4143C is a single-port 50 Gb/s, PCI Express 3.0 x8 Mezzanine Card, designed to the Open Compute Project (OCP) Mezzanine Card 2.0
Design Specification with a QSFP28 network connector as a Type 1 adapter with the board outline adhering to the original v0.5 dimensions. The adapter supports both QSFP28 optical modules and copper direct-attach cables.
The card uses the Broadcom BCM57414 50GbE MAC controller with an integrated single-channel 50GbE SFI transceiver.
Features
• Single-port pluggable media interface, which may be equipped with 50 Gb/s QSFP28 optical transceiver or with copper direct-attach cable
• Fully compliant with the SFF-8665 standard
• x8 PCI Express 3.0 compliant
• SR-IOV with up to 128 virtual functions (VFs)
• Function-Level Reset (FLR) support
• TruFlow™ flow processing engine
• Virtual Network Termination—VXLAN, NVGRE,Geneve, GRE encap/decap
• vSwitch acceleration
• Tunnel-aware stateless offloads
• DCB support: PFC, ETS, QCN, DCBx
• RDMA over Converged Ethernet (RoCE)
• Network Controller Sideband Interface (NC-SI)
• SMBus 2.0
• MCTP over SMBus
• PCIe-based UART and KCS
• Jumbo frames up to 9 KB
• Advanced Congestion Avoidance
• Multiqueue, NetQueue, and VMQ
• IPv4 and IPv6 offloads
• TCP, UDP, and IP checksum offloads
• Large Send Offload (LSO)
• Large Receive Offload (LRO)
• TCP Segmentation Offload (TSO)
• Receive-side Scaling (RSS)
• Transmit-side Scaling (TSS)
• VLAN insertion/removal
• Interrupt coalescing
• Network boot—PXE, UEFI
• iSCSI boot
• Wake-on-LAN (WOL)
• MSI and MSI.X
• Conforms to the OCP Mezzanine Card 2.0 Design Specification Type 1 vertical stack Description
Single-port 50 Gb/s QSFP28 Ethernet x8 PCI Express OCP 2.0 Mezzanine Card, RoHS-compliant
Storage temperature
-40oC to +70oC
Storage humidity
5% to 95% non-condensing
Item Dimension (L inchxW inchxH inch)
13 x 8 x 7
Weight
6.00 lb
Warranty Information
3 Years
Read Before Orderings
- Product images are for illustrative purposes only and the final product delivered may vary from the one shown above.
- In some cases, a product sold may arrive in different packaging than its original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item.
- At checkout, the shipping cost is a general estimate which is subject to change depending on size/weight/quantity of ordered goods.
- Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality.
- Refurbished printers may not have full ink cartridges or laser toners.
- Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees.
- Please note if you are concerned about any of the above conditions or have any question at all, we highly recommend that you contact us on sales@ithardwarehub.com or call 425-615-6227 before placing an order.
Related Products
