TP-Link CPE210 300Mbps 9dBi Outdoor CPE w/ 2x Internal Antennas
(No reviews yet)
Write a Review
- Brand:
- TP-Link
- Part Number #
- CPE210
- Availability:
- In Stock
$210.00
$175.00
- You save $35.00
Description
Specifications
- Mfr Part Number: CPE210
- Features:
- Built-in 9dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 27dBm/500mw
- System-level optimization for more than 5km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA(Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency, ideal for PTMP applications
- Centralized Management System - Pharos Control
- AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes
- Outdoor stabilized enclosure with IPX5 waterproof certification
- Dual Ethernet ports and grounding terminal integrated
- 6000V Lightning Protection, 15KV ESD Protection
- Passive PoE Adapter supports up to 60 meters (200 feet) power over Ethernet deployment and allows for device reset remotely
- Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security
- Selectable bandwidth of 5/10/20/40MHz
- Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools
- Easy antenna alignment with wireless signal quality indicators via Web interface
- Hardware:
- Processor: Qualcomm Atheros 560MHz CPU, MIPS 74Kc
- Memory: 64MB DDR2 RAM, 8MB Flash
- Interfaces: 1x 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in), 1x 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE
Passthrough), 1x Grounding Terminal - Antenna:
- Beam Width: 65° (H-Plane) / 35° (E-Plane)
- Built-in 9dBi 2x2 Dual-polarized Directional Antenna
- Protection: 15KV ESD Protection; 6000V Lightning Protection
- Power Consumption: 10.5 Watts (Max)
- Power Supply:
- Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
- Voltage range - 16-27VDC
- Enclosure:
- Outdoor ASA stabilized plastic material
- IPX5 waterproof Certification
- Dimensions (WxDxH): 224.0 x 79.0 x 60.0 mm
- Wireless:
- Standard: IEEE 802.11b/g/n (with Pharos MAXtream disabled)
- Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled)
- Wireless Speeds:
- Up to 300Mbps (40MHz, Dynamic)
- Up to 144.4 Mbps (20 MHz, Dynamic)
- Up to 72.2 Mbps (10 MHz, Dynamic)
- Up to 36.1 Mbps (5 MHz, Dynamic)
- Frequency: 2.4 ~ 2.483GHz
- Reception Sensitivity:
- 802.11b:
- 11M: -95dBm, 5.5M: -96dBm, 2M: -96dBm, 1M: -96dBm
- 802.11g:
- 54M: -79dBm, 48M: -80dBm, 36M: -84dBm, 6-24M: -88dBm
- 802.11n:
- MCS15: -76dBm, MCS14: -78dBm, MCS13: -80dBm,MCS12: -84dBm, MCS11: -87dBm, MCS10: -91dBm,MCS9: -93dBm, MCS8: -96dBm, MCS7: -76dBm,MCS6: -78dBm, MCS5: -80dBm, MCS4: -84dBm,MCS3: -87dBm, MCS2: -91dBm, MCS1: -93dBm, MCS0: -96dBm
- 802.11b:
- Transmission Power: 27dBm / 500mw (Adjustable power by 1dBm)
- Software:
- Wireless Configurations:
- Pharos MAXtream TDMA Technology
- 802.11b/g/n Modes
- Selectable Channel Width: 5/10/20/40MHz
- Automatic Channel Selection
- Transmission Power Control
- Dynamic Frequency Selection (DFS)
- WDS Enable/Disable
- Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
- SSID Broadcast Enable/Disable
- Multi-SSID with VLAN Tagging (AP mode only)
- Distance/ACK Timeout Setting
- Wireless MAC Address Filter
- Wireless Advanced:
- Beacon Interval/RTS Threshold/Fragmentation
- Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
- Management:
- Discovery and Remote Management via Pharos Control Application
- HTTP/HTTPS Web-Based management
- System Log
- SNMP Agent (v2c)
- Ping Watch Dog
- Dynamic DDNS
- SSH Server
- System Tools:
- Wireless Signal Quality Indicators: Signal Strength/ Noise/ Transmit CCQ/ CPU/ Memory
- Monitors: Throughput/ Stations/ Interfaces/ ARP/ Routes/ WAN/ DHCP
- Spectrum Analyzer
- Speed Test
- Ping
- Traceroute
- System-level Optimizations:
- Optimized IGMP Snooping/Proxy for multicast applications
- Hardware watch dog
- Wireless Configurations:
- POE Adapter:
- Efficiency: >80%
- Certifications: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
- Button: Remote Reset Button
- LED: 0~0.8A (Green); 0.8A~1.0A (Red)
- Input:
- Current: 0.8A Max @ 100V AC
- Voltage: 100V ~ 240V AC @ 50Hz ~ 60Hz
- Output: 24V DC, 1.0A Max (+4, 5pins; -7, 8pins)
- Interfaces: 1x AC Jack with Earth Ground, 1x 10/100Mbps Shielded Ethernet Port (Power + Data), 1x 10/100Mbps Shielded Ethernet Port (Data)
- Dimensions (WxDxH): 110.0 x 57.0 x 33.5 mm
- Others:
- Certification: CE, FCC, RoHS, IPX5
- Package Contents:
- Outdoor Wireless CPE
- 24V 1A Passive PoE Adapter
- Pole Mounting Straps
- AC Power Cord
- Installation Guide
- System Requirements:
- Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux
Read Before Orderings
- Product images are for illustrative purposes only and the final product delivered may vary from the one shown above.
- In some cases, a product sold may arrive in different packaging than its original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item.
- At checkout, the shipping cost is a general estimate which is subject to change depending on size/weight/quantity of ordered goods.
- Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality.
- Refurbished printers may not have full ink cartridges or laser toners.
- Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees.
- Please note if you are concerned about any of the above conditions or have any question at all, we highly recommend that you contact us on sales@ithardwarehub.com or call 425-615-6227 before placing an order.
Related Products
