QNAP Removable Drive TL-R1200PES-RP-US 12Bay 2U rackmount PCIe interface SATA JBOD

The TL-R1200PES-RP TL PCIe interface JBOD storage enclosure allows you to expand the storage capacity of a QuTS hero or QTS NAS by using SATA hard drives. Providing large data capacity and fast transfer speed, the TL-R1200PES-RP is the ideal solution for archiving/backing up virtualization applications, surveillance recordings, large data, and multimedia.

Actual number of expansion units may depend on the host NAS. Click here to learn more.

Note:

• The host QNAP NAS requires QuTS hero h5.1.2 / QTS 5.1.2 (or later) and updating to specific BIOS versions per each model.

• Supported maximum pool sizes: 2.0 PB for QuTS hero NAS; 308 TB for QTS NAS.


2.0 PB capacity

Expand up to 2.0 PB capacity1 for QuTS hero NAS, by connecting twelve expansion enclosures (up to 144 hard drives in total).


Economy

The TL-R1200PES-RP supports SATA hard drives, which are common, budget-friendly, and available with large capacities.


Up to 64 Gb/s

The TL-R1200PES-RP features PCIe Gen 3 x8, providing up to 64 Gb/s data transfer speed.

Note: Actual transfer speeds depend on the host NAS's PCIe slot and the storage units used.


Easy setup

Just connect your TL-R1200PES-RP to the host NAS to expand NAS capacity. RAID re-building on the host NAS is not required, and setup is finished within a few minutes.


Host-based power management

The TL-R1200PES-RP power on/off is linked with the host NAS.


Redundant power supply

Ensures service continuity with stable and reliable power supplies. Drive Bay
12 x 3.5-inch SATA 6Gb/s
The system is shipped without HDD. For the HDD compatibility list, please visit https://www.qnap.com/compatibility/
Drive Compatibility
3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Hot-swappable
Yes
Form Factor
2U Short Depth Rackmount
Host Interface
PCIe Gen3 x8, 1 x IN (dual SFF-8644), 1 x OUT (dual SFF-8644)
LED Indicators
Front panel: HDD 1-12, Power, Status, Link, Fan error
Rear panel: SAS connector, Enclosure ID
Buttons
Power
Max. number of HDDs/SSDs supported
12
Hard Drive Type
3.5" or 2.5" SATA 6Gb/s and 3Gb/s drives
Operating Temperature
0 - 40 ^oC (32^oF - 104^oF)
Storage Temperature
-20 - 70^oC (-4^oF - 158^oF)
Relative Humidity
5-95% RH non-condensing, wet bulb: 27^oC (80.6^oF)
Power Supply Unit
300W (x2), 100 - 240V
Fan
2 x 80mm, 12VDC
System Warning
Buzzer
Management
Managed via QNAP QTS / QuTS hero OS
1. Supports disk S.M.A.R.T. information
2. RAID expansion enclosure identifier
3. Locate RAID expansion enclosures
4. Locate hard disks on RAID expansion enclosure
5. Smart fan control by detecting system and hard drive temperature
6. Support Host-Based Power Management
Item Dimension (L inchxW inchxH inch)
11 x 24 x 24

Weight
46.00 lb

Warranty Information
5 years