JH148A | HPE 5510 48G PoE+ 4SFP+ HI 1-slot Switch - switch - 48 ports - managed

Description
Read Before Ordering

Description

Main Specifications

Product Description	HPE 5510 48G PoE+ 4SFP+ HI 1-slot Switch - switch - 48 ports - managed - rack-mountable
Device Type	Switch - 48 ports - L3 - managed - stackable
Enclosure Type	Rack-mountable 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+
Power Over Ethernet (PoE)	PoE+
PoE Budget	1440 W
Performance	Routing/switching capacity : 336 Gbps ¦ Throughput : 250 Mpps
Capacity	IPv4 routing table entries : 32768 ¦ IPv6 routing table entries : 16384
MAC Address Table Size	32K entries
Jumbo Frame Support	Yes
Routing Protocol	OSPF, RIP, IS-IS, BGP, VRRP, PIM-SM, static IP routing, PIM-DM, OSPF for IPv6, OSPFv3, PIM-SSM, ECMP, RIPng, IS-ISv6, MPLS, Bidirectional Forwarding Detection (BFD)
Remote Management Protocol	SNMP 1, SNMP, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, SSH, SSH-2, CLI
Features	Flow control, layer 3 switching, DHCP support, ARP support, MPLS support, auto-uplink (auto MDI/MDI-X), Weighted Round Robin (WRR) queuing, IPv6 support, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Quality of Service (QoS), RADIUS support, Rapid Ring Protection Protocol (RRPP) support, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), STP Root Guard, IPv4 support, Deficit Weighted Round Robin (DWRR), Strict Priority (SP), 802.1x authentication, Type of Service (ToS), MACsec support, Smoothed Deficit Weighted Round Robin (SDWRR), Virtual Private LAN Service (VPLS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3at, IEEE 802.3az
Power	AC 120/230 V
Power Redundancy	Optional
Dimensions (WxDxH)	17.3 in x 14.2 in x 1.7 in
Weight	16.53 lbs

Extended Specifications

General

Device Type	Switch - 48 ports - L3 - managed - stackable
Enclosure Type	Rack-mountable 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+
Power Over Ethernet (PoE)	PoE+
PoE Budget	1440 W
Performance	Routing/switching capacity : 336 Gbps ¦ Throughput : 250 Mpps
Capacity	IPv4 routing table entries : 32768 ¦ IPv6 routing table entries : 16384
MAC Address Table Size	32K entries
Jumbo Frame Support	Yes
Routing Protocol	OSPF, RIP, IS-IS, BGP, VRRP, PIM-SM, static IP routing, PIM-DM, OSPF for IPv6, OSPFv3, PIM-SSM, ECMP, RIPng, IS-ISv6, MPLS, Bidirectional Forwarding Detection (BFD)
Remote Management Protocol	SNMP 1, SNMP, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, SSH, SSH-2, CLI
Authentication Method	Secure Shell (SSH), RADIUS, TACACS, Secure Shell v.2 (SSH2)
Features	Flow control, layer 3 switching, DHCP support, ARP support, MPLS support, auto-uplink (auto MDI/MDI-X), Weighted Round Robin (WRR) queuing, IPv6 support, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Quality of Service (QoS), RADIUS support, Rapid Ring Protection Protocol (RRPP) support, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), STP Root Guard, IPv4 support, Deficit Weighted Round Robin (DWRR), Strict Priority (SP), 802.1x authentication, Type of Service (ToS), MACsec support, Smoothed Deficit Weighted Round Robin (SDWRR), Virtual Private LAN Service (VPLS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3at, IEEE 802.3az
RAM	2 GB - SDRAM
Flash Memory	512 MB
Status Indicators	Power, system, operation mode

Expansion / Connectivity

Interfaces	48 x 1000Base-T - RJ-45 ¦ 1 x console - RJ-45 - management ¦ 4 x 10Gbit LAN - SFP+
Expansion Slots	1 (total) / 1 (free) x expansion slot
Installed Modules Qty (Max)	0 (installed) / 1 (max)

Power

Power Device	Internal power supply
Installed Qty	0 (installed) / 2 (max)
Power Redundancy	Optional
Power Redundancy Scheme	1+1 (with optional power supply)
Voltage Required	AC 120/230 V
Power Consumption Operational	670 Watt

Miscellaneous

Rack Mounting Kit	Included
Compliant Standards	AS/NZS 60950-1, RoHS, FCC CFR47 Part 15, EN300-386, UL 60950-1, IEC 60950-1, EN 60950-1, EN 60825-1, GB 4943, EN 61000-4-29, CAN/CSA C22.2 No. 60950-1, Directive 2004/108/EC, ANSI C63.4-2009, EN 60825-2, EN 61000-3-3:2008, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-4-6:2009, EN 61000-4-11:2004, EN 300 386 V1.6.1, VCCI V-3/2013.04 Class A, CISPR 24:2010, EN 55022:2010 Class A, EN 55024

Dimensions & Weight

Width	17.3 in
Depth	14.2 in
Height	1.7 in
Weight	16.53 lbs

Environmental Parameters

Min Operating Temperature	32 °F
Max Operating Temperature	113 °F
Humidity Range Operating	10 - 90% (non-condensing)
Min Storage Temperature	-40 °F
Max Storage Temperature	158 °F
Humidity Range Storage	5 - 95% (non-condensing)

View AllClose

Read Before Orderings

Product images are for illustrative purposes only and the final product delivered may vary from the one shown above.
In some cases, a product sold may arrive in different packaging than its original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item.
At checkout, the shipping cost is a general estimate which is subject to change depending on size/weight/quantity of ordered goods.
Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality.
Refurbished printers may not have full ink cartridges or laser toners.
Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees.
Please note if you are concerned about any of the above conditions or have any question at all, we highly recommend that you contact us on sales@ithardwarehub.com or call 425-615-6227 before placing an order.

View AllClose