D-Link Network DGS-1510-28X SmartPro 24-Port Gigabit Switch with 4 10GbE SFP+

The DGS-1510 Series is D-Link’s latest generation of SmartPro switches with 10G port connectivity, making them ideal for deployment in SME/SMB core environments. The DGS-1510 Series provides a reliable, scalable, and modular interconnection between core switches and edge switches with rich capabilities and simplified flexibility. 24 10/100/1000 Mbps port model, these switches also include four optical ports – including 2 Gigabit SFP and 2 10G SFP+ ports. The 24 and 48 port versions are also available with 4 10G SFP+ ports instead of the 2 Gigabit plus 2 10G configuration.


10G SFP+ Stacking/Uplink Ports


Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting. Port Standards and Functions
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
802.3ae 10 GbE,
IEEE 802.3x Flow Control for Full-Duplex Mode,
Auto-negotiation
Number of Ports
DGS-1510-28X: 24 10/100/1000 Mbps, 4 10G SFP+

Network Cables
UTP Cat. 5, Cat. 5e (100 m max.) EIA/TIA-568 100-ohm STP (100 m max.)

Full/Half Duplex
Full/half duplex for 10/100 Mbps and Gigabit speed

Media Interface Exchange
Auto or configurable MDI/MDIX
Performance
Switching Capacity
DGS-1510-28X: 128 Gbps

Transmission Method
Store-and-forward

MAC Address Table
16,000 entries per device

MAC Address Update
Up to 512 static MAC entries,
Enable/disable auto-learning of MAC addresses

Maximum 64 bytes Packet Forwarding Rate
DGS-1510-28X: 95.24 Mpps

Packet Buffer Memory
DGS-1510-28X: 1.5 MB per device
AC Input
100 to 240 VAC 50/60 Hz internal universal power supply

Maximum Power Consumption
DGS-1510-28X: 22.3 W

Standby Power Consumption
DGS-1510-28X: 14.6W/100V 15.2W/240V

Smart Fan Quantity
DGS-1510-28X: 1
Acoustics
DGS-1510-28X: 42.7 dB(A)

Heat Dissipation
DGS-1510-28X: 76.0 BTU/hr

Diagnostic LEDs
Power/Stacking ID/Fan (per device),
Link/Activity/Speed (per 10/100/1000 Mbps port),
Link/Activity/Speed (per Gigabit SFP port),
Link/Activity/Speed (per 10G SFP+ port)

Certifications
CE, FCC, C-Tick, VCCI, BSMI, CCC
Safety cUL, CB
Item Dimension (L"xW"xH"):
13.7 x 20.15 x 3.6

Weight:
9 lb

Warranty Information:
Limited Lifetime