Tripp Lite PDUMH15AT Metered PDU 1U 8-Outlet 15A 120V w/Automatic Transfer Switching

Tripp Lites 120V 15A metered PDU system with Automatic Transfer Switching (ATS) is an 8 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned on at 250 milliscond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Supports 1U rackmount installation in a 2 or 4 post rack. Included are 8 NEMA 5-15R outlets, and two 5-15P input power cords. - 120V 15A metered PDU system with Automatic Transfer Switch (ATS)
- Dual input input cords, one attached (primary) and one optional-use detachable cord (secondary)
- Included cordsets support 5-15P plug-in connection
- Front panel digital ammeter displays power consumption in amps
- 8 built-in NEMA 5-15R output receptacles
- Optional ATS function enables setup for hot-swappable UPS maintenance bypass, dual UPS protection or dual AC input redundancy for critical single-corded network hardware
- Small 1U rackmount format installs in only one rack space with a maximum installed depth of 14.5 inches
Voltage compatibility - 120V
Frequency compatibility - 50/60 Hz
Output volt amp capacity (VA) - 15A / 1800VA
Output nominal voltage - 120V
Outlet quantity / type - 8 NEMA 5-15/20R outlets
Maximum input amps - 15A rated
Input connection type - Primary Attached input cable with NEMA 5-15P. Secondary (optional) detachable C13 to NEMA 5-15P
Input cord length - 12ft. (each)
Recommended electrical service - 120V 15A, dedicated line recommended
Front panel LEDs - 10 front panel LEDs display power on - off status for each outlet, plus 3 LEDs for power status on each input line cord. Digital Current Meter displays output power consumption in amps.
Shipping weight (lbs) - 15.2
Shipping weight (kg) - 6.9
Unit weight (lbs) - 11