Supermicro System SSG-6029P-E1CR12T 2U Xeon LGA 3647 12 Hot-swap 3.5 inch SAS3/SATA3 Brown Box

This CPU heat sink is designed for Supermicro X11DPL-i motherboard with 2U and above chassis equipped with Intel® Xeon® scalable processors. The heat sink has been fully tested and validated by Supermicro to ensure the best quality and cooling performance.


Key Features
- Corporate Database

- Database Processing & Storage

- Enterprise Server

- HPC, Data Center

- iSCSI SAN

1. Dual socket P (LGA 3647) supports Intel® Xeon® Scalable Processors, 3 UPI up to 10.4GT/s

2. Up to 2TB ECC 3DS LRDIMM, up to DDR4-2666MHz; 16 DIMM slots

3. 3 PCI-E 3.0 x16, 4 PCI-E 3.0 x8 (slot 1 occupied by controller)

4. 12 Hot-swap 3.5" SAS3/SATA3 direct attached drive bays

5. Broadcom 3108 SAS3 AOC

6. 2x 10GBase-T LAN ports with Intel X722 + PHY Intel X557

7. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN

8. 3 Hot-swap 8cm redundant PWM fans

9. 1200W Redundant Power Supplies Titanium Level (96%) Processor/Cache
CPU:
- Dual Socket P (LGA 3647)
- Intel Xeon Scalable Processors, 3 UPI up to 10.4GT/s
- Support CPU TDP 70-205W
Cores: Up to 28 Cores with Intel HT Technology
System Memory
Memory Capacity:
- 16 DIMM slots
- Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM, DDR4 up to 2666MHz
Memory Type: 2666/2400/2133MHz ECC DDR4 SDRAM
On-Board Devices
Chipset: Intel C624 chipset
SAS:
- SAS3 (12Gbps) via Broadcom 3108 AOC HW RAID
- RAID 0, 1, 5, 6, 10, 50, 60
SATA: SATA3 (6Gbps) RAID 0, 1, 5, 10
Network Controllers: Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557
IPMI:
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video: ASPEED AST2500 BMC
Input / Output
LAN:
- 2 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
USB:
- 4 USB 3.0 ports (rear)
- 1 Type A
Video: 1 VGA port
Serial Port / Header: 1 Fast UART 16550 port / 1 Header
System BIOS
BIOS Type: 256Mb AMI UEFI
Management
Software:
- Intel Node Manager
- IPMI 2.0
- NMI
- SPM, SUM
- SuperDoctor 5
- Watchdog
PC Health Monitoring
CPU:
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
FAN:
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature:
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
Form Factor
2U Rackmount
Available Colors
Black
Available Colors
Black
Front Panel
Buttons:
- Power On/Off button
- System Reset button
LEDs:
- Power status LED
- Hard drive activity LED
- Network activity LEDs
- System Overheat LED
- Power fail LED
Expansion Slots
PCI-Express:
- 3 PCI-E 3.0 x16 slot
- 4 PCI-E 3.0 x8 slots
- Slot 1 occupied by controller
Drive Bays
Hot-swap: 12 Hot-swap 3.5" SAS3/SATA3 drive bays
Optional: 2 Optional Onboard NVMe M.2
Backplane
SAS3 12Gb/s direct attached storage backplane, w/ 24x SAS3 2.5" drive slots
System Cooling
Fans: 3 Hot-swap 8cm redundant PWM cooling fans
Power Supply (76mm Width)
1200W Redundant Power Supplies with PMBus
Total Output Power: 1000W/1200W
Input:
- 100-127Vac / 15-12A / 50-60Hz
- 200-240Vac / 8.5-7A / 50-60Hz
- 200-240Vdc / 8.5-7A (for CCC only)
+12V:
- Max: 83A / Min: 0A (100-127Vac)
- Max: 100A / Min: 0A (200-240Vac)
- Max: 100A / Min: 0A (200-240Vdc)
+5Vsb: Max: 4A / Min: 0A
Output Type: 19 Pairs Gold Finger Connector
Certification: UL/cUL/CB/BSMI/CE/CCC
Operating Environment
RoHS: RoHS Compliant
Environmental Spec. :
- Operating Temperature: 10^oC to 35^oC (50^oF to 95^oF)
- Non-operating Temperature: -40^oC to 60^oC (-40^oF to 140^oF)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)
Item Dimension ( L inch x W inch x H inch)
30 x 23 x 14
Weight
61.00 lb
Warranty Information
1 Year