D-Link Network DAP-2682 Nuclias Connect AC2300 Wave 2 Dual-Band PoE Access Point

• Easy to manage with D-Link’s free centralized management software-based solution Nuclias Connect

• Superior throughput with dual-band transfer speeds up to 600 Mbps in the 2.4 GHz band and 1700 Mbps in the 5 GHz band

• Band Steering makes sure connected devices get the best available and supported frequency band

• Supports Power over Ethernet (802.3at) for simpler installation with less cable clutter

• Simple, soft-edge design, ideal for subtle visibility when wall or ceiling mounted (mounting hardware included)

• Supports multiple VLANs for enhanced network management and up to 16 SSID setups

• Supports WPA2™ - WiFi security for more protection

• 2 x Gigabit LAN port for high-capacity backhaul to the wired network

• Supports multiple AP modes to ensure performance optimization based on your network’s needs

• MAC Address Filtering and WLAN Partitioning ensure ultimate control of your network’s access

• Captive Portal with industry-standard authentication for enhanced access management

• Works as a standalone AP or as part of a centralized, scalable multi-device deployment


Free Nuclias Connect Remote Centralized Management Software

D-Link’s Nuclias Connect is a centralized management and analytics solution that brings convenience, control, customizability and cost-effective scaling to SMB (small-medium-sized business) networks. It enables network monitoring, management, and device configuration through a single, easy-to-use software interface.

What’s more – it’s free to download and there are no licensing or support fees. Easily manage your network, anytime, anywhere. Environment
Indoor
2.4GHz Speed
600 Mbps
5GHz Speed
1700 Mbps
MU-MIMO and Tx beamforming
Yes
Maximum Output Power
2.4 GHz :28 dBm / 5 GHz : 28 dBm
Interface
Two 10/100 /1000 Ethernet port (PoE Supported)
Mounting
Wall/Ceiling
PoE Mode
802.3at
Item Dimension (L inchxW inchxH inch)
10 x 12 x 3

Weight
3.00 lb

Warranty Information
Limited Lifetime